Configuring a Router Default IP Address Easily

In doing a wireless router configuration setup, you need to know the router default IP address. This is especially true during the initial setup and when you haven’t changed the default. You need the IP address to access your router’s web page where you will perform the configuration setup.

One IP address is 192.168.0.1 the default for D-Link routers and sometimes also an alternate default for Linksys routers. Although routers are assigned their default addresses, you can always change it during the configuration of your wireless router connection.
Such is the case with 192.168.0.1. It is often used by network administrators as the IP address when configuring their wireless connectivity. This is because they find this IP address to be more effective in facilitating connections on their network.

If you have to change your default IP to 192.168.0.1, you need to access your configuration menu to set it up. These are the easy steps to do it:

1. Connect your router to your pc via the Ethernet cable. To start the configuration, make sure that both of your pc and router are turned on.

2. On your web browser, type the default IP address. This shall pull up the web page of your router. On the box that appears asking for your username and password, you can type the default password of ‘admin’. In certain models, you will also need to type ‘admin’ as your username.

3. Once logged in, go to the network settings where there is an option that allows you to change your router’s IP address. You can now enter a new IP address. When you click on the save settings you new IP address shall be saved.

The router default IP address is usually given in the manual that accompanies your router, including instructions on how to use it in setting up your wireless router connection. Alternately, you can also find the default when you view it from the router’s web page or configuration menu.

This is the reason it is important that you secure your router’s configuration page with a strong password. Otherwise, anyone can just access it, view your IP, and mess up your configurations causing you big headache not to mention compromising not just your connection but your privacy as well.

You must also know the importance of changing your router default IP address. Unscrupulous elements, especially those that are highly knowledgeable and skilled, can hack your connection first through your credentials (username and password) then through your IP address.

Changing the IP address from default to your preferred IP that is acceptable and within the networks range can make it extremely hard for these rogues to maliciously attack your connection and do their unscrupulous stuff.

Tags: , ,

How to Strengthen Your Linksys Security Password

Your linksys security password is your important tool to protect your connection from being maliciously attacked by intruders. You have to make it a point to set up your linksys router password. A strong password is advisable and you can do this by changing the default password of your router.

Creating a Strong Password

Creating a strong linksys password is simple. The password should contain both letters and numbers, for example: A1; using both lower and upper cases like A1b2; comprising of at least ten (10) characters, such as A1b2CdeF34. The password should be meaningful to you so you can easily remember it but it should be difficult for others to crack.

Changing The Default Password

The default linksys router password is ‘admin’. In newer versions of the router, this default also serves as the username. You need this to enter the configuration settings of your router. Once done, you must change the default password to your preferred strong password.

To change your password, log in to your router’s web page at http://192.168.1.1. Make sure that your router and your pc is connected through the Ethernet cable. As you pull up the web page, you will see a pop up box that will ask you for your username and password.

That is where you are going to enter the default password, and if the page requires you for the username, you may also use the same default ‘admin’. By entering your credentials (username and password) you should be able to log in.

You will see several options to configure the settings of your router. For changing the password however, go to administration and click of the management tab. It is on this tab that you are going to change the default to a strong linksys security password.

As you click the button for password, it will ask you for your password where you will input the strong password that you have created. You will also need to confirm the password by inputting it the second time. Be sure to input exactly the same password in the right cases as your password is case sensitive.

Resetting the Password

If in case you have forgotten your password for whatever reasons or you want to change password as it may have been compromised, what you need to do is to press the reset button of your router for not less than thirty (30) seconds. It shall revert to its original settings or factory default.

Open your web browser and pull up the web page of your linksys router. Follow the same procedure as that of changing the default password. Make sure that you have created a strong password. Fill up the password field and retype your password to confirm.

To verify if your linksys security password is working, unplug the Ethernet cable connecting your router and computer, restart the computer, wait for about twenty (20) seconds, plug back the cable and access the web page of your router. If it accepts your password, then it must be working.

Tags: , ,